Clarisolve® 60 µm Lab Scale Depth Filters

Catalogue Number: CS60HX02H1

Description

Clarisolve® 60 µm Lab Scale Depth Filters, 0.027 m² (0.29 ft²)

Product Information

• Device Configuration: Lab scale Pod
• Filter Grade: 60HX
• Maximum Differential Pressure, bar (psid): Maximum: 2.1 bar (30 psid) @ 37 °C; Forward: 2.1 bar (30 psid) @ 4 ° or 37 °C; Reverse: 2.1 bar (30 psid) @ 37 °C
• Quality Level: MQ400

Applications

• Application: High-density cell cultures

Biological Information

• Bacterial Endotoxins: Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique (on filter media only)
• Sterilization: Integrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.

Physicochemical Information

• Product Water Conductivity at 25°C: ≤ 0.15 µS/cm post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.

Dimensions

• Height: 14 cm (5.3 in.)
• Width: 9.4 cm (3.7 in.)
• Length: 22 cm (8.5 in.)
• Filtration Area: 0.027 m²

Materials Information

• Chemistry: Polypropylene (PP)
• Device Material: Polypropylene
• Materials of Construction: Polypropylene (PP)
• Seal Material: Thermo Plastic Elastomer (TPE)

Packaging Information

• Material Size: 1

Specifications

• Metals: Per 24-hour static soak in 10 liters pure water post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft² (100 L/m²) of surface area:
  • Aluminum (AI): ≤0.183 mg/ft²
  • Antimony (Sb): <0.001 mg/ft²
  • Arsenic (As): below detectable limits
  • Barium (Ba): ≤0.108 mg/ft²
  • Bismuth (Bi): below detectable limits
  • Boron (B): ≤0.022 mg/ft²
  • Cadmium (Cd): below detectable limits
  • Calcium (Ca): ≤0.364 mg/ft²
  • Chromium (Cr): 0.000 mg/ft²
  • Cobalt (Co): below detectable limits
  • Copper (Cu): ≤0.004 mg/ft²
  • Gallium (Ga): 0.000 mg/ft²
  • Germanium (Ge): below detectable limits
  • Iron (Fe): ≤0.003 mg/ft²
  • Lead (Pb): below detectable limits
  • Lithium (Li): 0.000 mg/ft²
  • Magnesium (Mg): ≤0.213 mg/ft²
  • Manganese (Mn): below detectable limits
  • Mercury (Hg): below detectable limits
  • Molybdenum (Mo): <0.001 mg/ft²
  • Nickel (Ni): 0.000 mg/ft²
  • Potassium (K): ≤0.671 mg/ft²
  • Silver (Ag): below detectable limits
  • Sodium (Na): ≤21.0 mg/ft²
  • Strontium (Sr): ≤0.002 mg/ft²
  • Tin (Sn): 0.000 mg/ft²
  • Titanium (Ti): ≤0.004 mg/ft²
  • Tungsten (W): 0.000 mg/ft²
  • Vanadium (V): 0.000 mg/ft²
  • Zinc (Zn): below detectable limits
• TOC: Measured at below detectable limits.